|
Post by toonbay on Jul 12, 2009 20:33:43 GMT -1
Hi Got one of these on order to fit on my new manta ray 11. Have read posts on here and looked at fitting instructions but i have one small problem. I only have an opening hatch at the front so wont be a problem here to fit the nut on the bolt but what about the back where i dont have a hatch so cant access this area. Do i just use some sort of self tapping screw Any help guys will be appreciated. Cheers
|
|
bongoslide
valued Member
Have a good day !!!
Posts: 31
|
Post by bongoslide on Jul 12, 2009 21:13:42 GMT -1
Hi toonbay Give H20 a call, they should point you in the right direction and have supplies of Wellnuts for the akward areas as described. Highly recommended company. Hope this helps Cheers Bill
|
|
|
Post by toonbay on Jul 12, 2009 21:16:31 GMT -1
Cheers Bill will do thanks
|
|
|
Post by shrimpy on Jul 13, 2009 18:42:43 GMT -1
The well nuts that you need should come with the anchor kit, as well as instructions, they did with mine and a very clever and handy system wellnuts are too
|
|