|
Post by kickingk on Jul 4, 2007 6:35:53 GMT -1
I couldn't sit here any longer waiting for this injury to heal/cure so I went ahead and got the easy loader, this should let me load the yak onto the car without doing any further damage so I should be able to get out and have a paddle - AT LAST!!! Anyway here's a taster, I'll try and put up a full review later. Here's the X Factor on the loader ready to be lifted on the roof Looks like the date on the camera needs reset?
|
|
pav
valued Member
Posts: 43
|
Post by pav on Jul 4, 2007 15:18:23 GMT -1
am I right in remembering Zebra had made a lifting bar? Can't find the post now. Assuming Zebras reading, did you manage to get any photos up?
|
|
|
Post by kipper on Jul 7, 2007 11:06:56 GMT -1
I struggle getting my T120 onto a vito roof.This loader looks ideal.How much and where from please
|
|
s2vto
valued Member
Posts: 33
|
Post by s2vto on Jul 7, 2007 19:08:14 GMT -1
I put my prowler 13 on my vito van no problem.
Strapping it down is the hassle.
I looked at these in Birmingham show, they looked pukka but were not that cheap and also I take my roof bars off in the week.
|
|
|
Post by kickingk on Jul 7, 2007 20:09:12 GMT -1
I'll try and get the remaining photos up in the next day or so, no not cheap by any means but makes loading so easy, costs are dependant upon vehicle - I'll put link up later. I also don't leave the bars on, it simply clamps on the bars and the crosspiece/handlebar simply unclips so the process of removing the roofbars isn't an issue - hopefully the photos will make it clearer!
|
|
|
Post by SEAJUNKY on Jul 21, 2007 13:04:46 GMT -1
Have you got the link please, also what was the cost? ?
|
|
|
Post by ZEBRA on Jul 21, 2007 20:32:43 GMT -1
i think they are £239 from brookbanks steve .
|
|
|
Post by kickingk on Jul 22, 2007 7:41:09 GMT -1
Got mine direct from Kari-tek, price varies slightly dependant on car / van type etc I'm struggling with photobucket so can't get the full report up at the moment
|
|
s2vto
valued Member
Posts: 33
|
Post by s2vto on Jul 23, 2007 16:39:08 GMT -1
I did e-mail them for a price but no reply
|
|