|
|
Post by THURSOMAN on Aug 21, 2012 19:11:09 GMT -1
Brilliant write up and what a great job as usual. Getting a bit predictable getting it spot on all the time mate. High time you made a mess up and make the rest of us feel better about ourselves.  That tackle box looks fantastic! Chris |
|
|
|
Post by ZEBRA on Aug 21, 2012 23:57:35 GMT -1
the rear seat rod holders will work great for a fly or spinning rod they are tubes with a locking velcroe strap on them so the rod can be locked in while paddling to the marks the yellow bit is just a moulding hole filler usually you would put the rod mount base over it . the small tackle box was just a bit of nice ply i had knocking about and decided to make use of its had several coats of marine varnish and plastic hinges so should last well in the salt water . i made loads of mistakes over the years but somehow seam to have lost the photos chris  ;D |
|
|
|
Post by philpot on Aug 22, 2012 6:58:50 GMT -1
But what make is that rod holder Terry, it is just what I am looking for.
Phil
|
|
|
|
Post by ZEBRA on Aug 22, 2012 19:10:27 GMT -1
phil its the railblaze rod holder with an angle extension its really superb bit of kit
|
|
|
|
Post by philpot on Aug 22, 2012 21:16:25 GMT -1
when I come back from Flamborough, I will have a look for one. Thanks for that Terry.
Phil
|
|
;D