fitting a transducer?

[jimdog]

hi people,
ive recently bought a humming bird 343c fish-finder my question is where do i fit the transducer? my yak is a big game it wont fit into the scupper hole as its not round and has a mounting bracket with it, i just cant see how it would fit.

thank you for any help.

" ive a feeling its something simple"

[ZEBRA]

take a photo of the transducer jim and lets see the shape there are several models that come with the hummingbird 343c

[ZEBRA]

found it jim .
i noticed the same problem so this is what i did


this transducer is from a garmin f/f but the shape is the same .
all i used was a piece of quarter inch threaded bar and made a big washer out of a piece of waste plastic i cut the washer that shape so the scupper would still drain water .



its important to remember to seal any holes you cut for cables with a bung or a gland so your kayak does not fill with water

[jimdog]

thanks very much zebra its the same as i have, pheww saved me from getting more confuzzled .
it had to be simple really didnt it.
thanks again.