|
Post by izzetafox on Sept 6, 2010 10:39:37 GMT -1
Guys, I heard years ago that all Epson printers had an inbuilt counter linked to tasks it performs. When you hit a certain number the printer errors and if you contact Epson they will tell you it is an Engineer Job. Ouch!! Not talking pennies here. Well I also heard that somewhere there is a fix to reset the counter but as it did not affect me I forgot. Yesterday I was doing some printing and had to put a new cartridge in. As it went through the cleaning cycle it stopped with the ink light and paper feed light flashing alternately. I tried everything to no avail and was thinking that 5-6 years loyal service was a good run. Then I remebered the counter. After a load of searching I tracked down the relevant program. SSC service utility. At first it did not work then I did the sensible thing and read the instructions and away it went. My faithfull R200 with full face cd/dvd printing is back in business. So before you give up on you printer have a look and see if you have been caught in the deceitful manufacturers trap. Get it here. myprinter.altervista.org/simplefaq/mysimplefaq.html#counterTerry
|
|
ped
valued Member
Posts: 28
|
Post by ped on Sept 6, 2010 11:32:30 GMT -1
|
|
|
Post by wobbly1 on Sept 6, 2010 12:01:08 GMT -1
Hmm... I suspected something like that for Epson printers... Cunning and interesting. Ah yes, in my experience (I currently use 8 printers!) putting non-original cartidges in is the best way to ruin a printer and reduce print quality.... The most reliable/best printers I have are HPs, but since the print heads are in in the cartridges (HP invented the inkjet process), they are expensive. I get through 2-3 cartridges a week for a single printer, when things get hectic! Simon
|
|
ped
valued Member
Posts: 28
|
Post by ped on Sept 7, 2010 6:31:00 GMT -1
Depends what you use them for Wobbly, if it's high end photographic printing you may be right but for normal day to day stuff I see no degradation in quality
|
|