|
Post by shane1968 on Jun 25, 2011 16:52:46 GMT -1
|
|
|
Post by THURSOMAN on Jun 25, 2011 19:55:16 GMT -1
Good work Shane mate. Amazing what you can find in the old shed! ;D
Chris
|
|
|
Post by shane1968 on Jun 25, 2011 21:17:25 GMT -1
Well chirs the wheels are off an old carp fishing barrow . the ally came from some old boat seat mountings . and the plastic sheet i made the body out of came from ebay got a load of it some of it is 3/4 thick thats 12 mm i have used there and it cost me a £6.00 . .. my wife says i need to throw more stuff out .. lol it works very well just added a ratchet strap holds the boat a lot better .
|
|
|
Post by davidbennett on Jun 30, 2011 21:04:50 GMT -1
I made my own as well from some inflatable wheels kickin around and a some old press up bars ! haha still makes me chuckle but it worls really well and fits into the scupper holes i ll post a pic later
|
|
Spud
valued Member
Posts: 203
|
Post by Spud on Jul 1, 2011 8:53:19 GMT -1
Make sure you strap your yak to the trolley Dave its easy to damage the scuppers if the yak is bouncing up and down on the trolley Seen it a few times in the past
|
|
|
Post by davidbennett on Jul 1, 2011 9:11:58 GMT -1
good advice - didnt think of that - cheers
|
|