steve1
valued Member
Posts: 217
|
Post by steve1 on Feb 23, 2012 14:13:55 GMT -1
Do you find that you struggle to put the neoprene cover over the hatch on your kayak when you are on your own? This is my solution to this problem; I made 2 wooden blocks to fit either side of the cover. Then screwed a ring (generally used to hang pictures) into each. Then tied some 60lb mono to the ring on the 1st block, and threaded it through the ring on the 2nd block. I then tied the loose end to the hatch cover. Hatch cover with first block Pull the cover round and fit second block then pull the cover all the way round Job done NOW just fit the plastic hatch cover leaving the blocks on top of the neoprene cover saves all that struggling Steve
|
|
|
Post by izzetafox on Feb 23, 2012 15:14:47 GMT -1
;D
|
|
|
Post by philpot on Feb 23, 2012 17:15:46 GMT -1
Where there is a will, theres a way Phil
|
|
|
Post by THURSOMAN on Feb 24, 2012 17:25:09 GMT -1
Smart thinking batman Nice one
|
|