|
Post by nala on Sept 9, 2015 19:21:51 GMT -1
Well ive narrowed my choice down to the SEAPRO 340 HD in red(heavy duty) alu floor,it would have been the BISON 390 in green...
But,the small vessel registration states less than 3.6 mtr length and 9.9 hp...to keep it to the min cost.
They apparently tested the BISON 390 in Norway and it looks a good piece of kit....but a tad longer by 30cm..! sugar !
The write up and spec of the SEAPRO looks good,but if anyone knows otherwise or had the experience of owning one i'd be only too to hear your thoughts .
Engine wise,an 8hp or 9.9 maybe and either 4 or 2 stroke as long as its a reliable one...
|
|
|
Post by philpot on Sept 12, 2015 6:23:03 GMT -1
The Seapro is imported by Higham Marine in greater Manchester but when I spoke to them a little while ago, there were issues with supply and moved to another boat manufacturer. I would check if that is still the case because there will be no back up if needed and no replacement parts if under warranty. Take a look at Excel boats, cracking boats and to be very honest better than Seapro in my mind but worth a look anyway. www.excel-inflatables.co.uk/pg_inflatable.phpPhil
|
|
|
Post by nala on Sept 12, 2015 10:55:24 GMT -1
Thanks for that Phil......i was looking at the Excel 335 on fleabay tough boat,but only in alu' floor..... Cheers
|
|